Toyota Motor Philippines Corporation (TMP) is the largest automotive company in the country, with the widest vehicle line- up of 21* Toyota models. It has 71* dealers nationwide, including Lexus Manila, Inc., for its sales distribution and service centers.

TMP was incorporated on August 3, 1988 as a joint venture of the following business entities:
        GT Capital Holdings, Inc. (51%)
        Toyota Motor Corporation (34%)
        Mitsui & Co., Ltd. (15%)

TMP's head office and manufacturing plant are located inside the 82-hectare Toyota Special Economic Zone (TSEZ) in Santa Rosa City, Laguna. TSEZ is also home to a number of investors performing strategic roles in the manufacture and export of automotive products to ASEAN, Japan and other parts of the world. The Marketing Office of TMP is located at the 28th and 31st floors, GT Tower International, Makati City.

TMP currently produces the best-selling Innova and Vios. Its existing manufacturing plant has the capacity to produce over 55,000* units per year on two-shift production operations.

TMP operates with ten (10) organizational units: Marketing, Manufacturing, Production Control & Logistics, General Administration, Comptrollership, Treasury, Purchasing, Corporate Affairs, Vehicle Logistics and Affiliate Operations Support & Audit.

The company’s regular and outsourced manpower is composed of 3,695* Team Members.
—
*as of end-December 2019

Toyota Motor Philippines Corporation

Toyota Motor Philippines is looking for a ﻿Conversion Engineer to join our Conversion &amp; Accessories Department based in Santa Rosa City, Laguna, Philippines.

The Conversion Engineer﻿ is a member of the IMV0 and Conversion Section that is responsible in supporting the development of conversion models.

In this role, you are expected to be a domain expert in planning and project management.

Your role and responsibilities: ﻿

<ul>
	<li>﻿Development of conversion models. ﻿(﻿design review, sourcing of materials, trial and evaluation, certification approval)</li>
	<li>Responsible in studying body builder's guide and specifications creation for new conversion models.</li>
	<li>Responsible in analyzing and recommending specifications based on planning team requirements.</li>
	<li>Responsible in auditing body builders and parts suppliers.</li>
	<li>Preparation of project management/development reports.</li>
	<li>Responsible in processing accessory part number issuance.</li>
</ul>

Our perfect match:

<ul>
	<li>Candidate must possess at least Bachelor's/College Degree in Mechanical, Management, Industrial, Computer, Electronics and Communication Engineering</li>
	<li>You have achieved a satisfactory level of technical and professional skill or knowledge in position-related areas and are keeping up with current developments and trends in areas of expertise.</li>
	<li>You can present ideas effectively to individuals or groups when given time to prepare; deliver presentations suited to the characteristics and needs of the audience.</li>
	<li>﻿﻿You can establish courses of action for self and others to ensure that work is completed efficiently.</li>
	<li>You are capable of clearly conveying information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.</li>
	<li>You can make customers and their needs a primary focus of one's actions; developing and sustaining productive customer relationships.﻿</li>
</ul>

Conversion Engineer

It is a multi-national company with operations in Singapore, Malaysia, Thailand and other countries in Asia. Gardenia Phils. began its operations in 1998 with a state-of-the-art bread factory rated as one of the most modern large-scale bread manufacturing facilities in the country.

Gardenia Bakeries Phils., Inc.

Department: Engineering

The Technical Assistant will be performing administrative and clerical tasks including proper filing and documentation, scheduling of meetings, inventory management, reviewing, monitoring and ensuring compliance to ISO related requirements.

The post holder will provide efficient support in the area of administrative function, and technical function.

Technical Assistant

Department: Engineering

Job Type: Probationary

The Engineering Maintenance Planner will be responsible in ensuring that all the required resources, labor, materials, tools and equipment are ready before the work is scheduled.

The post holder will ensure that the maintenance plan is scheduled accordingly.

Engineering Maintenance Planner

Empire East is a renowned Real Estate developer owned and operated by billionaire Andrew L. Tan. Incorporated under the laws of the Philippines and registered with SEC in 1994, Empire East has had a solid base of successful  credentials that include conceptualization and construction of high-end homes in Metro Manila up until the outskirts of the city.


The Company’s Corporate or Business Profile Empire East Land Holdings, Inc. (the "Company") was incorporated under Philippine law on 15 July 1994. Prior to its incorporation, the Company was a division of Megaworld Corporation (formerly, Megaworld Properties & Holdings, Inc.) and was then known as its Community Housing Division. In 1994, Megaworld Corporation decided to spin off its Community Housing Division into what is now the Company for the purpose of separating its high-end residential and office business from its lower and middle-income housing business.

The Company is presently engaged in the development and marketing of mid-cost housing projects in the form of condominium communities, subdivision lots and house and lot packages, and commercial units to a limited extent. The Company also leases out commercial and industrial properties. Its core products are mid-to high-rise condominium towers within metro manila up to single-detached homes and house-and-lot packages in progressive suburban areas. As of December 2013, Megaworld holds 81.72% of the Company.



Our Vision- To be a brand of home that understands the humanity of its dwellers and crafts a cityscape of lifestyle empowerment.


Our Mission- To build homes with a blueprint that reflects the reality of the all-time wants and needs of aspiring homebuyers, integrated into dynamic communities engineered thru innovative and pioneering lifestyle concepts.


Empire East Land Holdings Inc.

General Description: 
Responsible for the survey checking of the project assigned.

Specific Job Description:

<ul>
	<li>Conducts site inspection, checking of accuracy of the staking, layout alignment of all civil structures done by contractor.</li>
	<li>Prepares planimetric plans for horizontal projects.</li>
	<li>Re-surveys / re-install monuments for all lots for turn over as requested by TurnOver Group.</li>
	<li>Provides technical support in the correction of Lot Titles.</li>
	<li>Ascertains report provided by Surveying Consultant for newly acquired projects.</li>
	<li>Communicates/coordinates with consultants, other departments/divisions, clients, agencies or other firms/offices relative to the project. Attends to other PDD or company matters/concerns (outside of the regular functions) when required, or upon advice.</li>
</ul>

Geodetic Engineer

Your trusted solutions provider.

A electrical engineering equipment and services company.

VISION
To be the trusted solution provider for the Philippine Electrical Industry

MISSION
We are a company providing professional electrical engineering services, equipment and consultancy as a solution provider for power system reliability and efficiency for effective energy cost management for industries and consumers.

VALUES:
Mastery
Integrity
Care
Excellence

WESTCO Electrical and Equipment Corporation

Electrical Technician

Work location: Kalayaan Avenue Quezon City

1. Installations and Testing: Assist in the installation, testing, and commissioning of electrical systems and equipment under the guidance of the Electrical Engineer.

2. Troubleshooting and Repairs: Assist in troubleshooting electrical issues and performing necessary repairs or replacements, following the instructions of the Electrical Engineer.

3. Maintenance and Inspections: Conduct routine inspections and preventive maintenance tasks as directed by the Electrical Engineer, ensuring compliance with safety protocols and industry standards.

4. Documentation and Reports: Help in maintaining accurate records of maintenance activities, including work orders, equipment history, and inventory. Assist in preparing reports on maintenance and repair work.

5. Equipment Calibration: Assist with the calibration of electrical instruments and equipment according to the recommendations provided by the Electrical Engineer.

6. Safety Compliance: Ensure adherence to safety regulations and guidelines while working on electrical systems. Follow safety protocols and report any potential hazards or concerns to the Electrical Engineer.

7. Equipment Inventory: Assist in maintaining an up-to-date inventory of electrical components, spare parts, and tools, ensuring availability for maintenance and repair activities.

8. Collaboration and Support: Collaborate with the Electrical Engineer and other team members to accomplish tasks effectively. Provide support in planning and executing maintenance projects.

9. Equipment Monitoring: Assist in monitoring the performance of electrical systems and equipment, reporting any abnormalities or inefficiencies to the Electrical Engineer.

10. Continuous Learning: Stay updated with the latest electrical technology trends, procedures, and regulations through training programs and self-learning to enhance skills and knowledge.

Remember, these responsibilities can vary depending on the specific requirements of the organization and the scope of work assigned by the Electrical Engineer.

Equipment Maintenance

Electrician

Attention to Detail

Time Management

Critical Thinking

Electrical Installation and Maintenance

Electrical Design

Electrical Technician

Established in August 2012, at its helm are seasoned managers, engineers and technical people whose only goal is to make NEWCORE become one of the country’s leading provider in interior fit-out, indoor air system and sustainable solutions in terms of quality, performance precision and safety standards.

SCOPE OF SERVICES

We specialize in INTERIOR FIT-OUT SYSTEMS, INDOOR AIR SYSTEMS & SUSTAINABLE SOLUTIONS. We employ a dedicated team of architects, engineers and skilled craftsmen to implement civil, mechanical, electrical, plumbing, fire protection, structured cabling, network connectivity, BMS, CCTV/surveillance monitoring, precision air-conditioning, interior design, monitoring and metering of indoor air quality, data logging and lighting systems.

We also provide optimal professional solutions in alternative energy, recycling programs & noise reduction.

We value our commitment to our clients. To deliver projects on time, with quality and value-for-money, we ensure a healthy and safe working environment during construction as we believe that upholding highest health and safety standards result in the highest productivity and quality of our services.

Newcore Industries International, Inc

<ul>
	<li>Designs and estimates the cost of mechanical systems for fit-out projects: (MEPFS, HVAC, Fire Protection, Plumbing), (Dialux, voltage drop and short circuit calculation), (CCTV, structured cabling, FDAS, Fire Alarm and Access Conrol)</li>
	<li>Attends meetings with client and local suppliers. Evaluate quotations technically and provides technical feedback.</li>
	<li>Inspects the sites to evaluate existing conditions of Mechanical installation and/or to estimate the amount of work to execute new engineering systems</li>
	<li>Inspects the sites whenever it is required to solve issues, or to support site implementation team.</li>
	<li>Reports to Technical, Design and QS managers</li>
</ul>

Mechanical I Electrical I Electronics Engineer

Remote Workmate is an Australian-owned offshore staffing company that helps business owners tap mission-critical expertise from highly skilled Filipino professionals. We help companies outsmart competitors and achieve remarkable growth.

By building and managing a high-performing remote team for you, we can improve workforce flexibility, boost productivity, and scale your business cost-effectively. At the same time, we get to provide Filipinos with fully remote jobs that offer work-life balance and help them build rewarding careers.

We have worked with over 500 businesses from different industries since 2014, and we are continuing to gain momentum globally. Our recruitment expertise and local knowledge enable us to find the best fit and fill positions effectively.

Remote Workmate

The CAD Technician plays a crucial role in the field of construction and engineering by providing precise technical support through their expertise in AutoCAD. This position demands meticulous attention to detail and proficiency in computer-aided design (CAD) software to facilitate the creation and modification of engineering drawings, blueprints, and various design documents. CAD Technicians are responsible for a wide range of tasks, including plan set updates, engineering detail revisions, material takeoffs, construction details, and permit corrections to ensure the seamless progression of construction projects.

 

Responsibilities:

<ul>
	<li>Demonstrate expertise in the utilization of AutoCAD 2021, ensuring that this essential software is leveraged effectively to create, edit, and manage technical drawings.</li>
	<li>Collaborate closely with the CAD Manager, Permit Manager, and Production Manager to ensure that templates and plan sets are consistently maintained in accordance with city standards and contemporary construction methodologies.</li>
	<li>Skillfully oversee tasks and schedules within CoConstruct/BuilderTrend, meticulously ensuring that project tasks progress in a timely and organized manner, with particular attention to preventing task delays.</li>
	<li>Conscientiously read, interpret, and comprehend the intricacies of design details and plan sets, ensuring that all technical documentation is thoroughly understood.</li>
	<li>Skillfully draft preliminary surveys, collaborating with Survey Technicians to establish a foundation for project design and development.</li>
	<li>Engage in productive collaboration with the Sales team to generate production drawings that align with project requirements and client expectations, thereby contributing to effective project execution.</li>
	<li>Stay informed and updated with the latest developments in AutoCAD software and drafting techniques, continuously expanding your knowledge and skill set to remain at the forefront of industry best practices.</li>
</ul>

CAD Draftsman

The Testing and Commissioning Engineer will be responsible for the following:

<ol>
	<li>Understand the use of the test equipment</li>
	<li>Prepare technical reports</li>
	<li>Visit customers and work site</li>
	<li>Perform services required by the client</li>
</ol>

Electrical Engineer | Testing and Commissioning

Aboitiz Construction, Inc. is one of the most reliable and respected industrial contractors in the Philippines. It is one of the few Philippine contractors with a very wide range of experience in major engineering & construction projects. We are capable of doing work from conceptualization to execution and commissioning, from earth moving to marine structures, from petrochemical to word-class resort, from warehouses to office buildings and more.

It has a regular workforce of over 500 engineers, technicians and administrative professionals supported by a ready pool of over 5,000 skilled personnel. Workforce is continuously built through partnership with the Technical Education and Skills Development Authority (TESDA), schools and skills training centers, as well as various barangays through mobile skills training. This partnership has become our ultimate and immediate source of skilled manpower for various projects nationwide.

Aboitiz Construction, Inc. has distinguished itself as a responsive and flexible organization with the capacity to handle markets requiring a specialized and broad technological base. Aboitiz Construction, Inc. is a registered triple “AAA” General Contractor with the Philippines Contractors Accreditation Board.

Aboitiz Construction, Inc. strength lies in its solid financial condition, its highly disciplined, trained and experiences employees and up-to-date design technology. The long list of awards is testimony to its objective —

“To be the Contractor of choice by completing projects on time, on budget, safely and within specifications.”

Aboitiz Construction, Inc.

Job Summary

The Water Treatment Plant Maintenance Manager is responsible for overseeing the maintenance of water treatment plants in compliance with Philippine water quality and safety standards. They ensure the uninterrupted supply of clean and safe drinking water to the public and manage a team of technicians.

Responsbilities:

<ul>
	<li>Responsible for plant maintenance including facilities, utilities, to reduce</li>
	<li>downtime and assure peak plant efficiencies.</li>
	<li>Develop and implement a preventive and corrective maintenance program to keep equipment and infrastructure in excellent condition.</li>
	<li>Manage maintenance schedules, including regular inspections, repairs, and equipment upgrades.</li>
	<li>Ensure compliance with safety standards and environmental regulations during maintenance activities.</li>
	<li>Lead, train, and supervise a team of technicians and support staff.</li>
	<li>Foster a culture of safety, teamwork, and continuous improvement within the maintenance department.</li>
	<li>Lead, mentor, engage and develop teams to maximize their contributions including training, coaching and managing performance.</li>
	<li>Develop and manage the maintenance budget, controlling costs and allocating resources efficiently.</li>
	<li>Identify cost saving opportunities while maintaining high quality service.</li>
	<li>Develop and implement emergency response plans to address potential plant failures or water quality issues.</li>
	<li>Coordinate with relevant authorities during emergencies and ensure public</li>
	<li>safety.</li>
	<li>Maintain comprehensive records of plant maintenance activities and equipment performance.</li>
	<li>Prepare and submit reports to the management as required.</li>
</ul>

Water Treatment Plant Facility Manager

1) Plans layout and oversees maintenance of protection equipment of an electric power distribution system to minimize interruption to service and danger to lives and equipment from abnormalities, such as overload, no load, and short circuits: Studies drawings of power system and makes complex calculations to determine type, number, location, and correlation of protectors, such as relays, circuit breakers, fuses, and grounding devices.

2) Plans adjustments and additions to protective system necessitated by increased demands in development of new residential areas and unusual requirements of heavy industry.

3) Coordinates testing, repair, and installation of equipment.

4) Studies new developments to determine suitability of their application to protection system.

5) May program and direct computer analyses of system operating characteristics, such as power flow under normal and short-circuit conditions, system stability, and voltage and load limitations to obtain data used for such purposes as timing major system changes and additions, and analyzing interconnecting system problems.

6) May be designated according to specialization as Grounding Engineer; Relay Engineer

Power System Protection Electrical Engineer

Aboitiz Power Corporation (AboitizPower, AP) is a leader in the Philippine Electric Power Industry with a portfolio of assets located across the country. It has several hydroelectric and geothermal assets in its generation portfolio and also has non-renewable power plants located across the country. 
 
This includes:

- Hedcor, Inc.
- Therma Luzon, Inc.
- Therma South, Inc.
- Therma Marine, Inc.
- Therma Mobile, Inc.
- East Asia Utilities Corp. 
- Cebu Private Power Corp. 
- AP Renewables, Inc.

At AboitizPower, we thrive together to drive change for a better world.

We are a PEOPLE-CENTRIC organization who provides growth OPPORTUNITIES on a professional and personal level. We shape a better future as we do purposeful WORK in an ENVIRONMENT that is culture-focused, continuously innovating, and where individual and team contributions aligned to winning with integrity are RECOGNIZED.

When you work at AboitizPower, you become part of an organization that is passionate and committed to advancing business and communities by providing reliable, reasonable, and responsible power to all.

AboitizPower is an equal opportunity employer. We believe that a diverse and inclusive workforce is crucial to our purpose of driving change for a better world. We consider and encourage all applicants without discriminating against age, sexual orientation and/or gender identity, disability, political opinion, religion, nationality, marital or parental status (including pregnancy), ethnicity or other status protected by law. Our equal opportunity and non-discrimination policy applies in all aspects of employment, including recruitment, hiring, regularization, promotions, transfers, discipline, termination, benefits and training.

We urge everyone to be vigilant against scams that involve fraudulent offers of employment with Aboitiz Power Corporation. Scammers are falsely claiming to be representatives of Aboitiz, offering jobs in exchange for recruitment fees. Aboitiz does not ask for money from our applicants at any point of the job application process.

#POWERyourFuture

Aboitiz Power Generation Group

The National Operations and Control Supervisor is responsible for leading the NOCC efforts towards the efficient implementation and execution of its operations to maximize generation for plants in Hedcor group and other RE plants (ROR, Wind &amp; Solar)

Regular Operations:

<ul>
	<li>Supervises the overall operations of the NOCC including formulation, execution, and evaluation of strategies, processes and systems to achieve the groups goals.</li>
	<li>Supervises the implementation of standard operating procedures and work instructions of all plants in Hedcor Group and other RE plants (ROR, Wind &amp; Solar)</li>
	<li>Track and maintain records for operations, such as site performance, downtime events or substation events through substation and plant management applications to assess and evaluate plant availability, reliability and efficiency.</li>
	<li>Maintain operations records from SCADA or other documentation through different applications to assess and evaluate plant availability, reliability and efficiency.</li>
	<li>Develop processes or procedures for NOCC operations through information management systems to streamline work within the control center</li>
	<li>Monitor and maintain records of daily facility operations through substation and plant management applications to assess and evaluate plant availability, reliability and efficiency.</li>
	<li>Reports plant performance on production, budget commitments, kWh losses update, and other relevant information/reports required by immediate superior.</li>
	<li>Ensures that expenses are within the approved budget by monitoring and controlling operations and manpower expenses (overtime). Monitors monthly expenditures for NOCC Operations and provides variance explanations to Management as needed</li>
	<li>Ensures availability of needed resources in the plants by conducting regular site inspection and checking the reports of the National Operations and Control Engineers.</li>
	<li>Assist in the preparation of the annual generation budget (short and long term). In collaboration with the Grid and RAM.</li>
	<li>Schedules and coordinates monthly meetings to discuss updates on KPIs, and other issues and concerns of subordinates pertaining to NOCC operations. Ensures that KPI’s are attained</li>
	<li>Provides data and trends to the maintenance team during outage . And assist in the conduct of RCA</li>
	<li>Ensures that critical alarms captured during operations are managed and reported to the Maintenance team for verification on site. Make sure to provide data to maintenance for verification.</li>
	<li>Ensures regulatory requirements WESM/ERC/DOE reports are being submitted with complete details and on time.</li>
	<li>Ensures DAN/renomination for all Hedcor plants are submitted. Make sure the 5minute requirements are implemented.</li>
	<li>Supervise employees to ensure quality of work or adherence to safety regulations or policies.</li>
	<li>Ensures compliance to ISO requirements and Implements Hazard Identification, Risk Assessment and Determination of Controls (ORMP)/Aspect Impact Assessment on operations in NOCC</li>
	<li>Ensures that INYOvation projects for NOCC are developed, approved, and implemented.</li>
	<li>During Rehabilitation Period</li>
	<li>Coordinates annual maintenance of all plants in Hedcor Group and other RE plants (ROR, Wind &amp; Solar)</li>
	<li>Monitors operations activities and reports its status to immediate superior.</li>
</ul>

National Operations and Control Center Supervisor

● Oversee the performance of contractors and ensure facilities are accomplished within 
safety protocols. 
● Regularly check on facilities and equipment to ensure compliance with codes, rules, and regulations. 
● Supervise projects and perform ground maintenance such as creation and managing of contracts. 
● Forecast trends, risks, and movement of the industry to plan for future projects and needs. 
● Plan and create sustainable projects that will support the organization’s growth. 
● Oversee the work of staff, vendors, and contractors. 
● Examine projects thoroughly and determine what needs to be repaired or renovated. 
● Lead operations and planning by managing the performance of vendors and contractors. 
● Maintain a given budget and review financial records to external facilities. 
● Organize monthly reviews with vendors and partners to assess the service level standards and look upon further improvements. 
● Resolve issues that arise and monitor further complications that may come up.

Integrated Facilities Manager

The Ateneo de Manila University (Ateneo) is one of the leading universities in the Philippines. More than 150 years in existence, the Ateneo has grown into a major Jesuit institution. Officially it became a university in 1959. It offers over 100 academic degree programmes. 

Ateneo offers Basic Education (Grade School, Junior and Senior High School). In addition, the Loyola Schools (college) is made up of four schools (Social Sciences; Humanities; Science and Engineering; and Management) that offer graduate and undergraduate degrees, with a total enrolment of about 10,000 students per year. The Ateneo has 4 professional schools located in 3 campuses in Quezon City, Makati City and Pasig City (Business; Government; Law; and Medicine and Public Health), with about 4,000 professional postgraduate students. 

It has an array of research centres, 11 of which are recognized as Centres of Excellence by the Philippine Commission on Higher Education. In addition to a European Studies Programme, it has a Centre for Asian Studies that fosters comparative research on East and Southeast Asia. 

The Ateneo has 207 partnerships with universities around the world (82 in Europe, 87 in Asia, 11 in Australia and New Zealand, and 27 in North and South America) and is a member of the ASEAN Universities Network and 3 other international university networks. The Ateneo’s Rizal Library is the most advanced in the Philippines with over 307,000 titles in its collection and online access to most major academic journals.

Ateneo de Manila University

Summary of Work Activities and Responsibilities:

Under the supervision of the Director for Campus Safety and Mobility, the Campus Mobility Head oversees the Campus Mobility Section, serving as the main resource on all matters related to the safety, security, and circulation flow of pedestrians, cyclists, and motorists across all the Ateneo campuses. This entails oversight on traffic, internal and external shuttle systems (e-Jeep, school services, carpools, tricycles), parking management, and pedestrian walkway management. The Campus Mobility Head also oversees the Campus Mobility Plan with the Director.

Main Duties and Responsibilities:

Traffic and Mobility Policies, Standards, and Guidelines

<ul>
	<li>Leads the development, review, and implementation of Traffic and Mobility policies and guidelines.</li>
	<li>Conducts regular assessments of campus traffic and mobility situations and maintains awareness of emerging trends and standards, while regularly reviewing and updating policies related to these areas.</li>
	<li>Benchmarks the section's policies, guidelines, and practices against global best practices on traffic and mobility and other relevant industries, providing necessary guidance and support to enable successful implementation.</li>
	<li>Develops and implements standard response procedures for new forms of traffic and mobility concerns and emergencies across all campuses.</li>
	<li>Leads the development and implementation of action plans to improve traffic and mobility across all Ateneo campuses and immediate vicinities.</li>
	<li>Gathers support and ensures buy-in for action plans to improve traffic and mobility within all Ateneo campuses and immediate vicinities, and proactively monitors progress towards established goals</li>
</ul>

Sharing Functional Expertise 

<ul>
	<li>
	Leads cross-functional collaboration and partnership with various units across the University to identify and implement initiatives that require the section's expertise.
	</li>
	<li>
	Provides expert guidance and advice to stakeholders on best practices and industry standards related to the section's area of expertise, fostering effective working relationships and promoting a culture of innovation, excellence, and continuous improvement.
	</li>
</ul>

Section Management and Development

<ul>
	<li>Supervises the performance of personnel under the Traffic and Mobility Section and monitors their accomplishments and assigned deliverables, and ensures that they are well-equipped and constantly trained and updated on the office standards</li>
	<li>Conducts strategic assessment and evaluation of the Section's processes, programs and initiatives, ensuring continuous improvements, maintenance and adjustment in the delivery and execution of all its undertakings.</li>
	<li>Prepares and monitors the Section's budget and expenditures and recommends cost effective solutions for the Office.</li>
</ul>

Ensuring Effective and Efficient Provision of Regular Services

<ul>
	<li>Leads the coordination with various units to ensure provision of regular services by the section</li>
	<li>Oversees daily operations and provides guidance on Traffic and Mobility concerns in the section and across all Ateneo campuses</li>
</ul>

Managing the Section’s Budget and Expenses

<ul>
	<li>Manages the budget and resources allocated for the section, ensuring efficient spending.</li>
	<li>Establishes and institutionalizes a process that will continually review the section’s systems and processes for efficient spending.</li>
</ul>

Continuous Improvement of the Section

<ul>
	<li>Consistently compares the team's performance to leading regional and/or global organizations that have established occupational safety and health systems, policies, and practices to identify areas for improvement and best practices to adopt.</li>
</ul>

Campus Mobility Head

Toyota Motor Philippines is looking for an ﻿Accessory Development Engineer to join our Conversion &amp; Accessories Department based in Santa Rosa City, Laguna, Philippines.

The Accessory Development Engineer is a member of the Accessory Development Section that is responsible for the development of accessories in support to model life management introduction.

In this role, you are expected to be a domain expert in planning and project management.

Your role and responsibilities: ﻿

<ul>
	<li>﻿Develop existing/new accessories to support model life management introduction. (﻿design review, trial and evaluation, mass production until parts introduction/model launching)</li>
	<li>Provide technical assessment of accessories for introduction.</li>
	<li>Provide technical support/information and conduct installation trainings to different stakeholders for introduction of new models.</li>
	<li>Preparation of technical reports.</li>
	<li>Responsible in processing accessory part number issuance.</li>
</ul>

Our perfect match:

<ul>
	<li>Candidate must possess at least Bachelor's/College Degree in Mechanical, Management, Industrial, Computer, Electronics and Communication Engineering </li>
	<li>You can establish courses of action for self and others to ensure that work is completed efficiently.</li>
	<li>You have achieved a satisfactory level of technical and professional skill or knowledge in position-related areas and are keeping up with current developments and trends in areas of expertise.</li>
	<li>You can make customers and their needs a primary focus of one's actions; developing and sustaining productive customer relationships.</li>
	<li>You are capable of clearly conveying information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.</li>
	<li>You can present ideas effectively to individuals or groups when given time to prepare; deliver presentations suited to the characteristics and needs of the audience.﻿</li>
</ul>

Accessory Development Engineer

Aboitiz Power Corporation (AboitizPower, AP) is a leader in the Philippine Electric Power Industry with a portfolio of assets located across the country.

At AboitizPower, we transform energy for a better world. 

When you work at AboitizPower, you become part of an organization that is passionate and committed to advancing business and communities by providing reliable, reasonable, and responsible power to all. 

AboitizPower is an equal opportunity employer. We believe that a diverse and inclusive workforce is crucial to our purpose of driving change for a better world. We consider and encourage all applicants without discriminating against age, sexual orientation and/or gender identity, disability, political opinion, religion, nationality, marital or parental status (including pregnancy), ethnicity or other status protected by law. Our equal opportunity and non-discrimination policy applies in all aspects of employment, including recruitment, hiring, regularization, promotions, transfers, discipline, termination, benefits and training.

We urge everyone to be vigilant against scams that involve fraudulent offers of employment with Aboitiz Power Corporation. AboitizPower will never ask or solicit any form of payment at any point during the job application process.  AboitizPower only uses its official pages and links to communicate open roles and its recruitment. To ensure your security, please correspond and refer to the official channels only. Our official channels are: 
1. Aboitiz Power Corporation Website: https://www.aboitizpower.com
2. Careers Website: https://careers.aboitizpower.com
3. LinkedIn: https://www.linkedin.com/company/aboitizpower




AboitizPower

The position holder is responsible to facilitate the execution of contract management of all ongoing ARI projects under execution stage. The role centralizes is to support the Project Contracts Compliance Supervisor/ Manager in the implementation of standard commercial issue resolutions, symbiotic monitoring and delivery of contract requirements, and maintaining a strong project commercial system for project execution. 

Outcomes Expected and Responsibilities:

<ul>
	<li>Facilitates the contractual interests protection of the company while maintaining sustainable commercial relationship with the Contractors for all renewable projects under execution</li>
	<li>Supports to ensure the cascaded commercial agreements are aligned and achieved by the projects through implementation of Project Management Standards across all ARI Renewable projects under execution. </li>
	<li>Facilitates the Project Coordinators in all ARI Renewable projects in preparing Contractual Letters, coordinating with CCRM and Legal Teams, processing change order and claims approvals, endorsement of project site procurements, and securing transaction authorization from proper approvers. </li>
	<li>Leads and engages in the development of Project Management Contract Standard including respective updates to its provisions, as deemed necessary, to strengthen the commercial structure of the projects </li>
	<li>Oversee the Project Coordinators of all Projects in ARI Renewables, which could entail onsite discussions and audit on contract management procedure implementation.</li>
	<li>Works with the Project Team to generate project-specific mitigation plans.</li>
	<li>Ensure proper commercial documentation is intact and organized with the Project Coordinators to protect Contract objectives.</li>
	<li>Integrates the Lessons Learned on Contract Applications from different projects and endorses to the Business Process Review Team. </li>
</ul>

Kalibrr Job Search

Featured Jobs

All Jobs

Remote Jobs

High Paying Jobs

Fresh Jobs

IT and Software

Sales and Marketing

Accounting and Finance

Senior Level Jobs

Internship and Junior Level Jobs